Put an end to oversized oven mitts! I admit to owning a pair, but those are going bye-bye now that I’ve made my own custom-sized oven mitts. =) This also makes a great (and quick) gift for a friend that loves to cook or bake, or a thoughtful creation for a house warming party. 9 easy steps below.
Materials for 1 oven mitt:
- ¼ yard (main print)
- ¼ yard (inside lining)
- ¼ yard heat-resistant batting (i.e. Insul-Bright)
- matching thread
- fabric scissors
Step 1 – create your oven mitt pattern
Trace your oven mitt pattern on scrap paper (you can use your hand as a guide), then cut the pattern out using scissors. To make a custom size oven mitt to fit your hand, use your hand as an outline and draw a 2 inch allowance along the perimeter of your hand.
Step 2 – cut the main fabric
Take your main fabric print and fold it in half so the wrong sides are facing together. Place the pattern on the top of your folded fabric, and pin in place. Make sure to pin through all 3 layers to keep in place. Using fabric scissors cut a ½ inch allowance along the top perimeter of the pattern. Where the opening to your mitt will be, leave 1 inch of fabric allowance along the edge as shown in red, below. You will use this fabric later to bind the edge.
Step 3 – Cut the lining fabric and batting
Take your main lining fabric and fold it in half so the wrong sides are facing together. Place the pattern on the top of your folded fabric, and pin in place. Make sure to pin through all 3 layers to keep in place. As shown below, using fabric scissors cut a ½ inch allowance along the top perimeter of the pattern except for the where the opening will be. Do the same for the batting.
Step 6 – Bind the mitten openings
Iron the 1 inch of fabric (from step 2) in half lengthwise, and then fold it over to the lining of the mitten. Pin and sew in place. Below is how the front and back will look finished.
Step 7 – create a loopy-loop for hanging the mitten
Using scrap fabric from your main fabric print, cut a 1.5”x6” strip. Iron the strip in half lengthwise. On each side, iron lengthwise about ¼” inward, as shown below. Sew closed to create a binded strip.
Step 8 – Pin the mitt together with right sides facing together
Take the two quilted mitten halves and with right sides together, pin in place. As designated by the red arrow below, place the loopy-loop you created in the previous step adjacent to the opening of the oven mitt with the loop facing the inside of the mitt. Pin in place. The stitched end of the loopy-loop should be sticking out ~1/4 inch as shown below.
Step 9 – Sew along the top perimeter of the mitt, then turn inside out
Sew a ¼ – 1/2 inch seam allowance along the top perimeter of the oven mitt, removing pins as you stitch. Obviously you will need to leave the opening of the mitten un-stitched. Start and end your stitch with a backstitch. When you come across the placement of the loopy-loop when sewing, I recommend doing a backstitch over it to make sure it’s secured. Trim any sides of the mitt that have bulk fabric. Lastly, turn the mitten inside-out. You’re done!